To reduce the size of your output, you can change your sampling delay to something larger, say 30-seconds.  I suppose you could also capture statistics when the host is not busy so you get fewer characters in the results, but that’s just being goofy.

A better way to reduce your ESXTOP output size is to selectively include only the statistics you are interested in, and is really what Mark was asking.  After all, all statistics from ESXTOP can be too many statistics, and chances are you already know what stats you are interested in.  Here’s how you can narrow down the collected stats for easier analysis and smaller output:

1. Enter ESXTOP in interactive mode on the Service Console by simply typing esxtop at the # prompt
2. Switch to a component you are NOT interested in capturing statistics on by pressing the corresponding menu option (c: ESX cpu, m: ESX memory, d: ESX disk adapter, u: ESX disk device, v: ESX disk VM).
3. Press f when viewing the component you do not want to capture.  A list of fields will be displayed.  You can toggle the fields on and off by pressing the letter corresponding to each field.  An * indicates that the field is on.  You want to turn off all of the fields you don’t want to collect.
4. Repeat steps 2 & 3 for the remaining components, leaving only what you want to capture.
5. Switch to the component you want to capture in batch mode and repeat step #3, except you will now enable what you want to capture.
6. Press W (capital W – case sensitive) to write out the ESXTOP configuration file.  You can accept the default or create new configuration files.  You may want to create a CPU-only config file, memory-only, and so forth.
7. Press CTRL+C to stop ESXTOP.
8. Now, invoke ESXTOP in batch mode, calling your updated or new configuration file you created in step #6 using the -c switch.  Here’s an example:# esxtop -b -d 30 -n 480 -c .esxtopcpustats > /tmp/esxtop_cpu_stats.csv where .esxtopcpustats is an ESXTOP config file with only CPU stats.  -d sets your capture interval to 30 seconds, and -n sets the number of samples to 480 (or 4 hours with a delay of 30 seconds).

Once your capture is complete you can replay the sampling in ESXTOP using replay mode (-R), or you can copy the .csv to a Windows system and use PERFMON or Excel to analyze the stats.  If using PERFMON or Excel you will notice that the system summary information displayed at the top of an interactive ESXTOP session is included in the output (console memory, console cpu, etc.).  As far as I know, there is no way to disable this, nor would you want to as it includes the time stamp necessary to interpret your data.

It is possible to use the vSphere CLI or the vSphere Management Assistant (vMA) to run RESXTOP, a version of ESXTOP designed for remote administration of ESXi or ESX.  You may note, however, RESXTOP from the vSphere CLI only works from a Linux client.  Using either of these tools will help you to automate ESXTOP statistics collection from multiple hosts using customized configuration files.

Related posts:

1. ESXTOP Batch Mode & Windows Perfmon I needed to grab some stats from my ESX hosts...
2. High CPU Ready, Poor Performance I ran into an issue with a customer today where...
3. Balloon Driver Problems with SQL I have been meaning to write this up for a...